34,50 €
Quick overview
This soft and flexible foam is made by mixing two components that expand about 10-12 times their original volume! This foam is excellent for making soft props that are safe to use and won’t break. For example a brick that you can throw. It is often used in theater, movies, industrial world, arts, crafts and so much more! Watch the video on the left side or scroll down on this page for detailed instructions.
Expand your molding & casting armory with these products:
Full product information
Mixing
Mix ratio
1:0.5 (part A: part B)
Pot time
30 seconds
Curing
Demolding time
30 minutes
Cure time
1 hour
Best curing temperature
Room temperature
Other
Expansion
10-12x original volume
Shelf Life
18 months
Mix parts A and B together in a container. Be sure to take the mix ratio into account, part B should only be about half as much as part A (mix ratio = 1:0.5). There is a high tolerance on this ratio, so it doesn't have to be perfect. Speed is more important.
Stir well for about 30 seconds.
Pour the mixture in your desired mold, shape or container.
After 30 minutes you can already take the foam out of your mold if you desire to do so. But be very carefull, it takes another 30 minutes for the foam to be completely cured! Sometimes it might be smarter to leave it in the mold until all the time has passed.
GHS Health hazards (if used improperly)
H315
Causes skin irritation.
H317
May cause an allergic skin reaction.
H319
Causes serious eye irritation.
H334
May cause allergy or asthma symptoms or breathing difficulties if inhaled.
GHS prevention precautionary statement
P201
Obtain special instructions before use.
P260
Do not breathe dust/fume/gas/mist/vapours/spray.
P281
Use personal protective equipment as required.
GHS response precautionary statement
P308
+313
If exposed or concerned: get medical advice/attention.
P333
+313
If skin irritation or rash occurs: get medical advice/attention.
Customers that bought this product often also bought:
SALE!!
SALE!!
SALE!!
SALE!!
Webshop 
